Filter
Top Products
FEEDER TRAYS
1-2 XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
Loading feeder trays
It is important to load paper properly in the feeder trays to prevent
jams and loss of production time. The following guidelines will help
ensure maximum efficiency of your IPS printer’s operation.
Guidelines for loading paper
When you are loading the paper, follow these guidelines to prevent
paper jams:
• Remove damaged sheets.
• Load the paper with the package wrapper seam side up.
• Make sure that the direction of the curl is consistent.
• Avoid fanning the paper unless the stock is predrilled.
• Do not load the paper above the MAX line on the length guide.
• Place any paper left in the bottom of the tray on top of the new
paper stack.
• For trays 3, 4, 5 and 6, load paper with curl side up. If you do
not detect paper curl, load paper with the wrapper seam side
down.
Additional guidelines for loading special stocks:
• When loading predrilled paper, fan the paper and remove
loose paper plugs.
• Load transparencies into trays 1 and 2 only.
• When loading tab stock, remove deformed, bent, or damaged
stock.
• Load preprinted paper in trays 3, 4, 5, and 6 only, in order not
to smudge the print. These trays are vacuum-type feeders,
unlike trays 1 and 2, which are friction-type.