Filter
Top Products
UNIX Printing Using TCP/IP LPR/LPD
Xerox 4500 PS TR
102
[[Entry Fields]]
NAME of queue to add
[your name]
ACTIVATE the queue? yes
Will this become the DEFAULT queue? no
Queuing DISCIPLINE first come first served
ACCOUNTING FILE pathname
[]
DESTINATION HOST for remote jobs
[your host]
Pathname of the SHORT FORM FILTER
for queue status output
[/usr/lpd/bsdshort]
Pathname of the LONG FORM FILTER
for queue status output
[/usr/lpd/bsdlong ]
Name of QUEUE on remote printer
[LPDPrt1]
NAME of device to add
[LPDPrt1]
BACKEND PROGRAM pathname
[/usr/lpd/rembak]
NOTE:
Make sure that the pathname of the short and long form filter are modified
to bsdshort/bsdlong.
The name of QUEUE on remote printer and NAME of device to add should
be the same and one of the following
LPDPrt1
LPDPrt2
LPDPrt1acr
LPDPrt2acr
Once the printer has been defined, printing can be performed using the lp,
lpr, qprt or enq commands.
Version 4.1
Before you can print via AIX version 4.1, the following 2 steps must have
been completed.
1. Host Configuration
You must make sure that the Xerox 4500 PS TR is defined as a host
system. This can be done by using the smit command. Use of this
command requires root authority (i.e. use the su command to switch to
the root user). Alternatively, you may add the additional IP entries
manually by editing the /etc/hosts file and appending the additional IP
address and name for the Xerox 4500 PS TR.