Filter
Top Products
Novell Setup for IPX/SPX
Xerox 4500 PS TR
94
12. Type the name of the new queue.
The name of the queue is user-defined. A commonly used
convention is to give it the same name as the print server with the
addition of “_Q”. (e.g. sales4_Q)
13. Select the volume where you want the print jobs to be stored.
Do not use the volume SYS as this may cause problems in certain
situations.
14. Select the new printer and press ENTER and then ESC.
Now make other NPRINTER configurations if so required.
15. Press ESC twice. .
16. Save the changes (YES) and press ENTER.
17. Press ESC three times.
18. Exit the program by pressing ESC a fourth time.
Proceed to the configuration of the various settings.
For configuration details, see chapter 3.