Filter
Top Products
UNIX Printing Using TCP/IP LPR/LPD
Xerox 4500 PS TR
104
2. Defining the remote printer/plotter using ‘’admintool’’
1. Enter the admintool command. (Use of this command will require root
authority)
2. Use the following menu items to supply the printer information:
Printer manager (Edit)
Add printer
Add access to remote printer
The following information must be supplied on the ‘’Add access to
remote printer panel’’:
Printer Name
The printer name is the queue name on the Xerox 4500 PS TR.
Depending on the type of print that will be printed (raw or auto-
carriage return (ACR)) and the attached output printer (LPT1 or LPT2),
this name can be one of the following:
LPDPrt1
LPDPrt2
LPDPrt1acr
LPDPrt2acr
Print Server
The printer server name must be the same as the host name
supplied in the host table.
Printer Server OS:
For LPDPrt1 and LPTPrt2, BSD (Berkeley) should be selected.
3. Enable the printer using the admintool
Ensure that the printer is enabled by using the admintool and selecting
the modify printer option and use the enable function.
Print can be directed to the defined printer using the supplied lp
commands. The lpr command may not be supplied with the base
operating system.