Filter
Top Products
5
5-12 Managing Print Jobs
Using the Fiery XJ Spooler
The Fiery XJ Spooler lets you monitor and manipulate the print jobs that you send to
the Fiery SI. It also lets system administrators track and manage all users’ print jobs.
Spooler jobs can be in one of the following queues:
Jobs in the queues are stored on the Fiery SI’s hard disk. Make sure that you leave
enough space on the hard disk for fonts and others spooler jobs.
You can use the Fiery XJ Spooler Job Log to view information about jobs printed to
the Fiery SI for job accounting purposes or saved for reference. The Job Log can be
printed to the Fiery SI or saved as a file and viewed in other applications.
Print Normal print jobs sent to the Fiery SI appear in the Print queue.
You can move and manipulate these jobs as described below.
Hold Jobs sent to the Hold queue remain in the Hold queue until they
are moved to the Print queue or deleted. If you need to print the
same document frequently, you can send it to the Hold queue and
move a copy of the job to the Print queue every time you need to
print it. You can also send large jobs to the Hold queue and then
move them to the Print queue when other users are not printing.
Printed The jobs most recently sent to the Fiery SI are saved in the Printed
queue. You can drag these jobs back to the Print queue to print
additional copies. The number of jobs saved in the Printed queue is
set by your system administrator in the Setup.