Filter
Top Products
Page 9-18 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Machine Administration
Managing Departments
This setting is used to enable or disable Department Mode and to clear Department data and
codes.
1
¾ Press the [Machine Status] key.
2
¾ Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
¾ If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Select [Department] using the
Navigation Keys is displayed and
press [Enter].
¾ Enter the Master Access Code.
)
The first time that you access
Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
System Admin Tools
[Department]
4
¾ Select [Management] using the
Navigation Keys and press
[Enter].
Department
[Management]