Filter
Top Products
Paper Jams
Chapter 5: Clearing Jams and Jam Recovery ❖ 5-3
Table 5.1 Paper jam messages
Message Description/Corrective Action
Clear Area A
Clear Env/Bypass
A paper jam has occurred in Area A.
ACTION: Clear the Envelope Feeder or the Bypass Feeder. Then reseat Tray 1.
Clear Area A
Reset Tray 1
A paper jam has occurred in Area A.
Use one of the following procedures to clear Area A:
•
“Clearing Area A (No Duplex Module)”
(page 5-7)
•
“Clearing Area A (No Duplex Module)”
(page 5-7).
Then reseat Tray 1.
Clear Area B
Reset Tray 2
A paper jam has occurred in Area B.
Use the procedure:
•
“Clearing Area B”
(page 5-12).
Then reseat Tray 2.
Clear Area C
Reset Tray 4
A paper jam has occurred in Area C.
Use the procedure
“Clearing Area C”
(page 5-12) to clear Area C.
Then reseat Tray 4.
Clear Area A,B
Reset Tray 2
A paper jam has occurred in Areas A and B.
Use one of the following procedures to clear Area A:
•
“Clearing Area A (No Duplex Module)”
(page 5-7)
•
“Clearing Area A (With Duplex Module)”
(page 5-9).
Then use the procedure
“Clearing Area B”
(page 5-12) to clear Area B. Then
reseat Tray 2.
Table 5.1 Page 1 of 4