Xerox N24 Printer User Manual


 
Replacing the Toner Cartridge
6-2 DocuPrint N24, N32, and N40 User Guide
Replacing the
Toner Cartridge
This section describes how to replace the DocuPrint N40
Toner Cartridge in both a standard configuration printer
and a printer with a Duplex Module attached.
If your printer does not have a Duplex Module installed,
go to the section “Standard Configuration” (page 6-3).
If your printer has the Duplex Module installed, go to the
section “Duplex Configuration” (page 6-6).
Instructions for replacing the Toner Cartridge are also
available on a label on the back of the left front cover of
the printer and in the Toner Cartridge box.
Do not expose the Toner Cartridge to direct sunlight or
artificial light for more than 15 minutes. Overexposure
will permanently damage the photosensitive imaging
drum.
Do not open the drum shutter or touch the green imaging
drum surface.
Be sure to shake the Toner Cartridge as directed to
distribute the toner inside the cartridge. Print quality may
be degraded if the toner is not evenly distributed. If the
toner has not been properly freed by shaking the
cartridge, you may hear a noise when powering on the
printer, and the Toner Cartridge may be damaged.
Never touch the Fuser area inside the printer (where a
label indicates high temperature).