Loading original documents and paper
3.
7
2
Take the paper out manually.
3
Close the scan unit. In order to close the cover, push the
tab to the left and hold it down. Then lower the cover
carefully until the cover is holding down the tab. Then you
can move your hand and finish lowering the cover.
Be careful not to pinch your fingers!
NOTES
:
• If you continuously print many pages, the surface of the
output tray may become hot. Be careful not to touch the
surface, and especially keep children away from the surface.
• The output tray can hold up to 50 sheets of paper. Remove
the pages so that tray is not overloaded.
Printing to the rear cover (Face up)
Using the rear cover, paper comes out of the machine face up.
Printing from the manual feeder to the rear cover provides a
straight paper path
. Using the rear cover might improve the
output quality with special materials.
To use the rear cover, open the rear cover by pulling it up.
CAUTION
:
The fuser area inside the rear cover of your
machine becomes very hot when in use. Take care when you
access this area.