Filter
Top Products
Reports
WorkCentre Pro 665/685/765/785 9-19
Reception Report Setup
Reception Reports can automatically be printed by the WorkCentre
whenever a document is received at the Relay Station or into a
Mailbox.
Refer to the procedures that follow to manually print a Reception
report for the ITU-T Mailboxes.
To select the automatic Reception Reports print option:
1. Press:
2. Select the report type you want to setup:
To automatically print a Local Mailbox Reception Report, press
then . Select
On
or
Off
. A reception list automatically
prints when the machine receives/stores a document in a local
Mailbox (see Chapter 8, “Mailbox Communications”).
To automatically print a Remote Mailbox Reception Report, press
then . Select
On
or
Off
. A reception list automatically
prints when the machine receives/stores a document into a
Mailbox from a remote party (see Chapter 8, “Mailbox
Communications”).
To automatically print a Relay Station Reception Report, press
then . Select
On
or
Off.
A reception list automatically
prints following a Relay Station Reception (see Chapter 5, “Relay
Communications”).
To select another, enter , then and repeat this step.
*** Menu item numbers may vary according to configurations.
Menu
***
01. Local to mailbox
02. Remote to mailbox
03. Relay station