Filter
Top Products
XiNCOM Corp.
Settings – Dynamic DNS
Dynamic DNS
Service
Use this to Enable/Disable the Dynamic DNS feature, and select the required
service provider.
• Disable – Dynamic DNS is not used.
• TZO – Select this to use the TZO service (www.tzo.com). You must configure
the TZO section of this screen.
• Standard Client – Select this to use the standard service (from
www.dyndns.org or other provider). You must configure the Standard Client
section of this screen.
• 3322(in China) – This is available in China. It is similar to “Standard client”
WAN Port
Binding
• Select the WAN port on which the Dynamic DNS is used.
• The "Force Update" button will update your record on the Dynamic DNS
Server immediately.
TZO Custom
Dynamic DNS
Service
If you have registered for this service, complete these fields.
• Key – Enter your Key, as recorded on the TZO Web site.
• E-mail – Enter your E-mail address, as recorded on the TZO Web site.
• Domain – Enter the domain name allocated to you by TZO.
Standard
Client or 3322
If you have registered for this service, complete these fields.
• User Name – Enter the user name recorded by the service provider.
• Password – Enter the password recorded by the service provider.
• Verity Password – Re-enter the password above.
• Server – Enter the name or IP address of the service provider's Server.
• Host Name - Enter the domain name allocated to you by the service provider.
Additional
Standard
Client or 3322
Settings
These options are available if using the standard client.
• Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain
name) will also be forwarded to you.
• Enable backup MX – If enabled, you must enter the Mail Exchanger address
below.
• Mail Exchanger – If the setting above is enabled, enter the address of the
backup Mail Exchanger.
Page 41