Filter
Top Products
• Stateful Packet Firewall: Protects your network using advanced Stateful Packet
Inspection against unwanted access from the outside along with malicious hackers, DoS
and DDoS attacks.
Twin WAN Router Features (Continued)
• Advanced NAT features: Access Filters, DMZ, DDNS, Remote Management, Dynamic or
Static Routing, Special Applications, URL blocking, Virtual Servers, SNMP. Supports up to
100,000 concurrent sessions on the 502 and 602 and 10,000 on the 402.
• DHCP Server: The built-in DHCP server assigns up to 253 dynamic IP addresses.
• Multi DMZ: Fully supports situations where your ISP allocates multiple IP addresses, up to 8
static IP addresses per port.
• Transparent Bridge Mode: Used when you would like to locate a firewall or a server behind
the router while utilizing the routers load balancing and automatic failover function. Supports
multiple IP addresses through the ARP proxy.
• Remote Management: Full configuration of the router through the internet, you can even
upload updated firmware.
• Special Applications: Used for applications where the port number used for the response is
different to the port number used by the sender. Such as online games and chats.
• Access Filter: Gain fine control over the Internet access and applications available to LAN
users. Five (5) user groups are available, and each group can have different access rights.
• URL Blocking: Block access to web sites by the URL or IP address to increase employee
productivity or prevent them to visit undesirable websites.
• Virtual Servers: Allow Internet users to access Internet servers on your LAN. Easy
configuration of standard servers such as Web, FTP or E-Mail servers, plus the ability to
define your own Server types if required.
• Dynamic DNS: Dynamic DNS allows use of a Domain name even with a dynamic IP address.
• QoS
(Available only on the XC-DPG-502 and 602 models): Allows you to schedule and
direct network traffic to speed up critical applications.
• UPNP
(Available only on the XC-DPG-502 and 602 models): Universal plug and play for
easy connectivity making it much more user friendly.
• Remote Management: The Twin WAN Router can be configured and managed by any
computer on your LAN (Local Area Network) and if the router is configured to access the
internet it can be configured remotely.
• Multi-Segment LAN Support: LANs (Local Area Network) containing one or more
segments are supported via the Twin WAN Routers built in Static Routing table.
• E-mail Alert: When one of the WAN ports disconnects or the router detects an intruder, an
E-mail will be sent out to the system administrator advising him of such.
• System Log: This feature generates real time hardware and software information about
the router and is very useful to monitor the device.
Page 4