Filter
Top Products
E-20
Menu structure
■ 3 <INITIAL>
INPUT A ➞ INPUT B ➞ D4 VIDEO ➞ S VIDEO ➞ VIDEO ➞ DVI
Menu item
COLOR SYSTEM
S
Selects the color system to use when the input signal is from a video source. Available selections are
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, and SECAM. Usually, setting the unit to AUTO will
result in the unit automatically selecting the appropriate color method. However, since the unit does not
automatically detect NTSC4.43 under AUTO mode, set the color method to NTSC4.43 manually to view
NTSC4.43 images.
INPUT A SIGNAL
S
Selects the type of input signal received at INPUT A.
INPUT A SYNC TYPE
S
Selects the sync mode of the input signal received from INPUT A. (For RGB TV only)
INPUT B SIGNAL
S
Selects the type of input signal received at INPUT B.
INPUT B SYNC TYPE
S
Selects the sync mode of the input signal received from INPUT B. (For RGB TV only)
DVI SIGNAL
S
Selects the type of input signal received at DVI.
AUTO POWER OFF
Setting the power saving mode to ON will cause the unit to automatically turn off the lamp and place
itself in the standby mode if no signal is received through the inputs on the main unit for 30 minutes.
AUTO INPUT SEARCH
Automatically searches through input sources in the following order if no input signal is received at the
currently selected input.
DISPLAY LANGUAGE
S
Selects the language to use in the menu display.
LAMP RUNNING TIME
S
Displays the total lamp running time. You can reset the lamp running time in the submenu attached to
this menu item.
RESET
S
Resets all parameters on the menu and held in memory to their default factory settings.
Selections
AUTO/NTSC/NTSC4.43/PAL/PAL-M/
PAL-N/PAL60/SECAM
COMPONENT/RGB PC/RGB TV
AUTO/Separate Sync/Composite Sync/
Sync on Green
COMPONENT/RGB PC/RGB TV
AUTO/Separate Sync/Composite Sync/
Sync on Green
COMPONENT/RGB PC/RGB TV
OFF/ON
OFF/ON
/English/Deutsch/Español/Français/
Italiano/Portuguêsa/ /
ALL SETTINGS/ALL MEMORIES/
CURRENT MEMORY