Filter
Top Products
Recording Functions 26
User’s Guide
Status indicators
During the operation of the automatic punch-in/out function, you can determine the status by checking
the indicators shown in the following table:
Function Display Indicators LEDs
Mark the pre-roll point (see step 3).
Start the tape playing (see step 4). If
you press the AUTO PUNCH I/O
key while the tape is playing, the
operation starts here.
Mark the punch-in point (see step 5).
Mark the punch-out point (see step 6).
The tape is rewound, waiting for
rehearsal (also see step 6).
Rehearsal mode (see step 8).
The tape is rewound, ready for
recording (see step 9).
Recording mode (see step 10).
While the tape is rewinding, the Play
LED flashes the waiting pattern.
AUTO PUNCH
START
IN
OUT
2
REHE
REC/PAUSE PLAY
AUTO PUNCH
START
2
(slowly)
AUTO PUNCH
START
IN
2
(slowly) (rapidly)
AUTO PUNCH
IN
OUT
2
(slowly) (rapidly)
AUTO PUNCH
OUT
2
(slowly)
AUTO PUNCH
START
2
(rapidly)
AUTO PUNCH
IN
2
AUTO PUNCH
OUT
2
AUTO PUNCH
START
2
(rapidly)
AUTO PUNCH
IN
2
AUTO PUNCH
OUT
2
AUTO PUNCH
START
2
(waiting)
(
oo—oo—
)