Filter
Top Products
980515-001 Rev. A P110i User’s Manual 7
2
Printer Installation
Installing the P110i Printer
Connecting the P110i Printer
The following instructions will guide you through the installation of the P110i printer.
1. Place the printer in a location that allows easy access to all sides. The printer should
never be operated while resting on its side or upside down
Caution • Do not power the printer with USB attached to your computer at this
time.
The driver will prompt you when it is time to plug in and power up your
printer.
Caution • Limit electrical power supplied to the P110i Printer to 24 VDC. Limit
excess current draw to 16 amps or less, using an associated circuit
breaker or other such device. Never operate the printer in a location
where operator, computer, or printer can get wet. Personal injury could
result. The printer must be connected to an earthed electrical power
supply and properly protected against electrical surges and grounding
faults. The power supply pack can only be replaced by the same
product from the manufacturer.