Filter
Top Products
P110i Printer Setup
Loading Cards
980515-001 Rev. A P110i User’s Manual 19
Loading Cards
To help you load, print, and collect cards, the P110i has the following items:
Card Feeder
The card feeder is used for loading cards, it can hold up to 100 cards of 30 mils thickness. The
card feeder is located under the card feeder cover of the P110i printer.
Load cards into card feeder as follows:
1. Open card feeder cover.
2. Slide card guide all the way to the right until it locks in place with an audible click.
3. Remove cellophane wrapper from card stack.
Caution • DO NOT bend cards or touch print surfaces as this can reduce print
quality.
Note • The surface of the cards must remain clean and dust free. Always store cards in
an enclosed container. Ideally, use cards as soon as possible. If cards stick together,
carefully fan or shuffle them.
Note • For Cards with magnetic stripe refer to Appendix A for loading instructions.
CARD
GUIDE
CARD FEEDER
Note • Static charges and edge burrs from the card die-cutting process can render individual
cards stuck together with significant adhesion force. These cards must be
physically
separated from each other before inserting into the feeder; if not separated, feeding or
printing problems may occur.