Filter
Top Products
P4T/RP4T
User Guide
23
Programmable LCD Settings
In addition to the status icons, the LCD on the control panel can display many of the printer’s settings and functions as text as deter-
mined by the printer’s application. Applications can be written to allow the user to view and /or modify these settings using the scroll
and select keys on the display. Refer to the following tables for a partial set of printer features that can be programmed to display on
the LCD.
The LCD has a backlighting option which allows viewing of the screen in a dark environment, or provides better contrast in a very bright
environment. Use of the display backlight will decrease the time the printer will run between charges. Refer to the section “Extending
Battery Life” for more information.
Extended LCD Functions
Function Default setting Scroll & Select Options
Sensor Type Bar
• Bar
• Gap
Baud Rate 19200
• 9600
• 19200
• 32400
• 57600
• 115200
Data Bits 8
• 7
• 8
Parity N (none)
• E (Even)
• N (None)
• O (Odd)
LCD Contrast 8
• Increase (15max.)
• Decrease (15 max.)
No-activity Timeout 120 sec.
• Decrease (0 min.)
2
• Increase (120 max.)
Audio Volume 3
• 1 – Low
• 2 – Medium
• 3 - High
Media Type Journal
• Journal
• Label
LCD Backlight
3
Momentary On
• Momentary On w/ time delay
• O
Factory Reset (Resets
all to factory set
values)
No
• No
• Yes
NOTES:
1: LCD menu options are under speci c application control. Not all options may be available In your printer’s application.
2: A No-activity timeout value of “0” means the printer will remain on until powered o by the operator.
3: LCD Backlight turns on when any key other than FEED is pressed.
23
Section Continues
Printer Preparation
pg. 7
Connecting the
Printer pg. 27
Radio Regulatory
Information pg. 31
RP4T Printers pg.
35
Maintenance pg. 36
Troubleshooting pg.
38
Speci cations pg.
43
Appendices pg. 46 Index pg. 52
P4T Overview-
pg. 5
Manual
Introduction pg. 4