Filter
Top Products
P4T/RP4T
User Guide
37
P4T Series Cleaning
Caution • To avoid possible personal injury or damage to the printer never insert sharp or pointed objects into the printer
mechanism.
Area Cleaning Method Interval
Printhead Elements
Use a Zebra cleaning pen to clean the print
elements from end to end (the print elements
are located in the thin gray line on the
printhead).
After every ve rolls of media (or more
often, if needed)
Platen Surface
Rotate the platen roller and clean it thoroughly
with the cleaning pen.
Peeler Bar
Clean thoroughly with the cleaning pen.
As needed
Tear Edge
Exterior Wipe with water-dampened cloth
Interior
Brush/air blow. Ensure the Bar Sensor, Gap
Sensor and Label Present Sensor windows and
the Media Support Disks are free of dust.
Figure 17.1- P4T Series Cleaning
Printhead
Elements
Label Presence
Sensor
Gap Sensor
Platen Surface
Peeler Bar
Media
Support Disks
Tear Edge
Bar
Sensor
Figure 17.2- Cleaning the P4T Series Peeler Assembly
Printer Preparation
pg. 7
Connecting the
Printer pg. 27
Radio Regulatory
Information pg. 31
RP4T Printers pg.
35
Maintenance pg. 36
Troubleshooting pg.
38
Speci cations pg.
43
Appendices pg. 46 Index pg. 52
P4T Overview-
pg. 5
Manual
Introduction pg. 4