Filter
Top Products
51
RW Series User Guide
continued
Figure 21: Installing the RW 420 into the Cradle
• Place the bottom of the printer over the two pins in the
Cradle.
• Rock the top of the Printer into the Cradle and press firm-
ly until it latches in place.
• Ensure the Cradle power and charge indicators are lit and
turn the printer on.
Remove and retain the
Docking Connector
Cover
Place the
Printer over the
retaining pins in
the Cradle.
Rock the Printer into
the Cradle to latch it in
position.
Power Indicator
Always Green when power is on
Charge
Indicator