Filter
Top Products
52
RW Series User Guide
If the charge indicator does not light up, unlatch the printer from the
Vehicle Cradle, lift it clear from the Cradle and re-seat it.
Refer to the Vehicle Cradle Installation Guide for more complete
information on the power and charge indicators
You can load media (including media from an external sup-
ply) and perform cleaning operations normally when the
RW 420 Printer is installed in the Cradle .
Removing the RW 420 from the Cradle
Refer to Figure 22.
• Turn the Printer off.
• Push on the latch on the Cradle and rock the top of the
printer away from the Cradle.
• Lift the Printer out from the Cradle.
Replace the Docking Connector Cover if you will be us-
ing the Printer for an extended period of time away from the
Cradle.
Figure 22: Removing the RW 420 from the Cradle
Lift the printer free of
the retaining pins.
Press the
Latch button
to release the
Printer.
Rotate the
Printer out of
the Cradle.