Filter
Top Products
57
RW Series User Guide
Figure 25: Cleaning RW Series Printers
RW 420 illustrated
RW Series Cleaning
Area Method Interval
Printhead
(Figure 25)
Use a Zebra cleaning pen or 70%
isopropyl alcohol on a cotton swab to
clean the print elements from end to
end (the print elements are located in
the thin gray line on the printhead).
After every five rolls of
media (or more often, if
needed)
Platen Roller
(Figure 25)
Rotate the platen roller and clean it
thoroughly with the cleaning pen or
70% isopropyl alcohol and a cotton
swab.
Tear bar
(Figure 25)
Clean thoroughly with the cleaning
pen or 70% isopropyl alcohol and a
cotton swab.
Exterior Water-dampened cloth As needed
Interior
(Figure 25)
Brush/air blow. Ensure the Bar
Sensor and Gap Sensor windows are
free of dust.
After every five rolls of
media (or more often, if
needed)
Tear Bar
Bar Sensor
Gap Sensor
Platen Surface
Printhead
Elements