Zebra Technologies 160S Printer User Manual


 
Standard Fonts
The scalable smooth font (CG Triumvirate™ Bold Condensed) is ex-
pandable on a dot-by-dot basis, height- and width-independent, while
maintaining smooth edges. Maximum size depends on available mem-
ory.
Fonts A, B, C, D, E, F, G, and H are expandable up to 10 times, height-
and width-independent; however, fonts E and H (OCR-A and OCR-B)
are not considered in-spec when expanded.
IBM Code Page 850 international character sets are standard in fonts A,
B, C, D, E, F, G, and through software control.
Note:See“Optionsfortheavailabilityofadditionalfonts.
Font Matrices for8 dots/mm Printhead(105Se and 160S)
Font Matrix
Type* Character Size
Inches Millimeters
Height
Width
Inter-
character
gap
Height
Width
Char./inch
Height
Width
Char./mm
A
95 1
U-L-D 0.044 0.029
33.90
1.13 0.75 1.33
B
11 7 2
U 0.054 0.044
22.60
1.38 1.13 0.89
C, D
18 10 2
U-L-D 0.088 0.059
16.95
2.25 1.50 0.67
E
28 15 5
OCR-B 0.138 0.098
10.17
3.50 2.50 0.40
F
26 13 3
U-L-D 0.128 0.079
12.71
3.25 2.00 0.50
G
60 40 8
U-L-D 0.295 0.236
4.24
7.50 6.00 0.17
H
21 13 6
OCR-A 0.103 0.093
10.71
2.63 2.38 0.42
GS
24 24 0
SYMBOL 0.118 0.118
8.48
3.00 3.00 0.33
0 Default: 15 x 12 U-L-D Scalable
* U = Uppercase, L = Lowercase, D = Descenders
Zebra S-Series User’s Guide 1-9
17