Filter
Top Products
PAUSE Key Self Test
This self test is actually comprised of four individual test features.
1. The initial self test prints 15 labels at speed “A” then automatically
PAUSES the printer. Each time the PAUSE key is pressed, an addi-
tional 15 labels print out.
2. While the printer is PAUSED, pressing the CANCEL key once alters the
self test. Now each time the PAUSE key is pressed the printer prints 15 la-
bels at speed “D” (“C” for the 300 dpi 105Se).
3. While the printer is PAUSED, pressing the CANCEL key a second time al-
ters the self test again. Now, each time the PAUSE key is pressed the
printer prints 50 labels at speed “A.”
4. While the printer is PAUSED, pressing the CANCEL key once alters
the self test a third time. Now, each time the PAUSE key is pressed the
printer prints 50 labels at speed “D” (“C” for the 300 dpi 105Se).
Note: On printers with either the rewind or peel option installed, the
Peel Mode is activated during the first half (steps 1–4) of the
PAUSE Key Self Test. On printers with a rewind option, the
rewind plate must be removed for proper function of the peel
sensors during the test. The first label to print will say, “PEEL
OPTION INSTALLED”. Each label must be manually
removed from the sensor path before the next label will print.
Steps 1–4 will then be repeated in Rewind Mode.
3-10 Zebra S-Series User’s Guide
Figure 3.3 PAUSE Key Test Sample Printout
46