Zebra Technologies 160S Printer User Manual


 
Appendix A - 230 VAC Power Cord
230 VAC Power Cord
Depending on how the Zebra printer was ordered, a power cord may or
may not be included when the printer is optioned for 230 VAC,
50/60 Hz operation.
If a power cord is not supplied, you will need to obtain one with the fol-
lowing specifications:
The overall length must be less than 3.8 meters.
It must be rated for at least 5 amps, 250 V.
The CHASSIS GROUND (EARTH) MUST BE CONNECTED to
assure safety and reduce electromagnetic interference. This is done
by the third wire in the power cord.
The plug cap should bear the certification mark of a known interna-
tional safety organization (see Figure A.2).
Zebra S-Series User’s Guide A-1
Figure A.1 AC Power Cord
Figure A.2 International Safety Organizations
85