Zoom 4320A Network Card User Manual


 
159
Please refer to "Using a modem station for fax transmissions" for information on
the configuration procedure.
The telephone number of the fax destination may have been entered incorrectly.
Please check the telephone number.
If the setting under COM Auto Connect Settings has been set to "Off", a
connection will not automatically be established with the modem. Please
connect to the modem manually.
When you place a call using a company switchboard or other exchange, the
system may require you to enter a "0" before the telephone number itself.
Please check the type of telephone line you are using.
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1.
Open [Printers and Faxes] from the Control Panel, right-click on the
[Fax] icon, and then click on [Properties].
The [Fax properties] window will appear.
2.
Select the [Device] tab, right-click on the modem you wish to use,
and then click on [Properties].