Filter
Top Products
Appendix B:
Front and Back Panels
The X6v Front Panel
The following table describes each LED on the X6v's front panel.
LED Description
POWER Green when the X6v is plugged into a power
source. Red when a self-test error is found.
ETHERNET Lights if any Ethernet port of the X6v is
plugged into the Ethernet port of a powered-up
device. Flashes when data is sent.
Additional lights for each Ethernet port are on
the back of the X6v.
WLAN Lights when the Wireless Local Area Network
is running and enabled. Flashes when data is
sent.
DSL Flashes when the X6v is performing its startup
sequence.
Steady on when the unit has synched up with
its DSL connection.
Note: If the light fails to switch from flashing
to steady after a minute or two, check with your
DSL provider that the DSL connection is
activated, or refer to Appendix D,
Troubleshooting on page
153.
Appendix B: Front and Back Panels
143