Filter
Top Products
There are several options you can set when you configure a PSTN
to VoIP bridge.
• You can control which callers can access bridge mode.
• You can allow all callers to access bridge mode.
• You can restrict access only to callers with Caller ID.
†
• You can restrict access only to particular callers based on
their Caller IDs.
†
• For the callers you allow, you can require that they enter a
security code.
If you activate a security code, callers who enter an incorrect code
will ring through to the phone that is connected to the X6v. This is
convenient for someone who is traveling, and who may some of
the time want to use the bridge feature to make local calls, but who
other times may want to reach someone in their home or office.
To configure a bridge from PSTN to VoIP, in the VoIP area of the
Configuration Manager, click the Advanced VoIP Setup icon
,
in the left menu pane select Subscription Services, and then select
Bridging from PSTN to VoIP:
Note: To use this feature, your PSTN service must include Caller
ID Display.
65
Chapter 4: Setting Up VoIP Service