ZyXEL Communications NWA-3160 Series Network Card User Manual


 
Chapter 8 MBSSID and SSID
ZyXEL NWA-3160 Series User’s Guide
121
QoS Select the Quality of Service priority for this BSS’s traffic.
In the pre-configured VoIP_SSID profile, the QoS setting is VoIP. This is
not user-configurable. The VoIP setting is available only on the
VoIP_SSID profile, and provides the highest level of QoS.
If you select WMM from the QoS list, the priority of a data packet depends
on the packet’s IEEE 802.1q or DSCP header. See Section 6.3.1 on page
85 for more information on WMM and WMM priorities. If a packet has no
WMM value assigned to it, it is assigned the default priority.
If you select ATC from the QoS list, the ZyXEL Device automatically
assigns priority based on packet size. See Section 6.3.2 on page 85 for
more information on ATC.
If you select ATC+WMM from the QoS list, the ZyXEL Device uses WMM
on the wireless network and ATC on the wired network. See Section 6.3.3
on page 86 for more information on ATC+WMM.
If you select WMM_VOICE, WMM_VIDEO, WMM_BEST_EFFORT or
WMM_BACKGROUND, the ZyXEL Device applies that QoS setting to all
of that SSID’s traffic.
If you select NONE, the ZyXEL Device applies no priority to traffic on this
SSID.
Note: When you configure an SSID profile’s QoS settings,
the ZyXEL Device applies the same QoS setting to all
of the profile’s traffic.
Layer-2 Isolation Select a layer 2 isolation profile from the drop-down list box. If you do not
want to use layer 2 isolation on this profile, select Disable. See Section 9.1
on page 123 for more information.
Intra-BSS Traffic
blocking
Select Enable from the drop-down list box to prevent wireless clients in this
profile’s BSS from communicating with one another.
MAC Filtering
Select a MAC filter profile from the drop-down list box. If you do not want to
use MAC filtering on this profile, select Disable. See Section 9.4 on page 128
for more information.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 37 Configuring SSID
LABEL DESCRIPTION