ZyXEL Communications NWA-3160 Series Network Card User Manual


 
Chapter 25 System Maintenance and Information
ZyXEL NWA-3160 Series User’s Guide
238
25.2.1 Resetting the Time
The ZyXEL Device resets the time in three instances:
1 On leaving menu 24.10 after making changes.
2 When the ZyXEL Device starts up, if there is a timeserver configured in menu 24.10.
3 24-hour intervals after starting.
25.3 Remote Management Setup
25.3.1 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next.
Time Zone Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving If you use daylight savings time, then choose Yes.
Start Date Configure the day and time when Daylight Saving Time starts if you selected
Yes in the Daylight Saving field. The hr field uses the 24 hour format. Here
are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second
Sunday of March. Each time zone in the United States starts using Daylight
Saving Time at 2 A.M. local time. So in the United States you would select
Second, Sunday, March and 2:00.
Daylight Saving Time starts in the European Union on the last Sunday of
March. All of the time zones in the European Union start using Daylight Saving
Time at the same moment (1 A.M. GMT or UTC). So in the European Union
you would select Mar., Last, Sun. The time you type in the hr field depends
on your time zone. In Germany for instance, you would type 02 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
End Date Configure the day and time when Daylight Saving Time ends if you selected
Yes in the Daylight Saving field. The hr field uses the 24 hour format. Here
are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of
November. Each time zone in the United States stops using Daylight Saving
Time at 2 A.M. local time. So in the United States you would select First,
Sunday, November and 2:00.
Daylight Saving Time ends in the European Union on the last Sunday of
October. All of the time zones in the European Union stop using Daylight
Saving Time at the same moment (1 A.M. GMT or UTC). So in the European
Union you would select Oct., Last, Sun. The time you type in the hr field
depends on your time zone. In Germany for instance, you would type 02
because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel” to save your configuration, or press [ESC] to cancel.
Table 92 System Maintenance: Time and Date Setting
FIELD DESCRIPTION