Filter
Top Products
Chapter 4 Tutorial
ZyXEL NWA-3160 Series User’s Guide
60
Figure 25 Tutorial: Layer 2 Isolation Profile
Enter the MAC addresses of the two network devices you want users on the guest network to
be able to access: the main network router (00:AA:00:AA:00:AA) and the network printer
(AA:00:AA:00:AA:00). Click Apply.
4.2.3.3 Activate the Guest Profile
You need to activate the Guest_SSID profile before it can be used. Click the Wireless tab. In
the Select SSID Profile table, select the check box for the Guest_SSID profile and click
Apply.
Figure 26 Tutorial: Activate Guest Profile
Your Guest wireless network is now ready to use.
4.2.4 Testing the Wireless Networks
To make sure that the three networks are correctly configured, do the following.
• On a computer with a wireless client, scan for access points. You should see the
Guest_SSID network, but not the VoIP_SSID network. If you can see the VoIP_SSID
network, go to its SSID Edit screen and make sure Hide Name (SSID) is set to Enable.
Whether or not you see the standard network’s SSID (SSID04) depends on whether “hide
SSID” is enabled.