Filter
Top Products
Chapter 8 Wireless Configuration
NWA-3500/NWA-3550 User’s Guide
135
Enable Antenna
Diversity
Select this to use antenna diversity. Antenna diversity uses multiple
antennas to reduce signal interference.
Enable Breathing
LED
Select this box to disable the WLAN LED (light). Clear this box to
enable the WLAN LED.
Enable Spanning
Tree Control (STP)
(R)STP (Section 8.4.1 on page 139) detects and breaks network
loops and provides backup links between switches, bridges or
routers. It allows a bridge to interact with other (R)STP -compliant
bridges in your network to ensure that only one path exists between
any two stations on the network. Select the check box to activate
STP on the NWA.
Enable Roaming Roaming allows wireless stations to switch from one access point to
another as they move from one coverage area to another. Select this
checkbox to enable roaming on the NWA if you have two or more
NWAs on the same subnet.
Note: All APs on the same subnet and the wireless stations must
have the same SSID to allow roaming.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 25 Wireless: AP + Bridge
LABEL DESCRIPTIONS