Filter
Top Products
Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
62
5 In the Send Immediate Alert section, select the events you want to trigger
immediate e-mails. Ensure that Rogue AP Detection is selected.
6 Click Apply.
3.4.4 Configure Your Other Access Points
Access point A is now configured to do the following.
• Scan for access points in its coverage area every ten minutes.
• Recognize friendly access points from a list.
• Send immediate alerts to your email account if it detects an access point not on
the list.
Now you need to configure the other wireless access points on your network to do
the same things.
For each access point, take the following steps.
1 From a computer on the wired network, enter the access point’s IP address and
login to its Web configurator. See Table 3 on page 56 for the example IP
addresses.
2 Import the friendly AP list. Click ROGUE AP > Configuration > Browse.... Find
the “Flist” file where you previously saved it on the network and click Open.
3 Click Import. Check the ROGUE AP > Friendly AP screen to ensure that the
friendly AP list has been correctly uploaded.
4 Activate periodic rogue AP detection. See Section 3.4.2 on page 60.
5 Set up e-mail logs as in Section 3.4.3 on page 61, but change the Mail Subject
field so you can tell which AP the alerts come from (“ALERT_Access_Point_B”,
etc.)