Filter
Top Products
Chapter 20 VLAN
NWA-3500/NWA-3550 User’s Guide
248
20.2.1 RADIUS VLAN Screen
Use this screen to configure your RADIUS Virtual LAN setup. Your RADIUS server
assigns VLAN IDs to a user or user group’s traffic based on what you set in this
screen.
Native VLAN Check this to assign the Management VLAN ID as a Native
VLAN. Leave this blank if you do not know the native VLAN
ID assigned by the network administrator.
A native VLAN is the default VLAN where untagged traffic
can pass through between two switches.
Note: The Native VLAN assignment must be the same
on two switches for it to work.
VLAN Mapping Table Use this table to have the NWA assign VLAN tags to packets
from wireless clients based on the SSID they use to
connect to the NWA.
Index This is the index number of the SSID profile.
Name This is the name of the SSID profile.
SSID This is the SSID the profile uses.
VLAN ID Enter a VLAN ID number from 1 to 4094. Packets coming
from the WLAN using this SSID profile are tagged with the
VLAN ID number by the NWA. Different SSID profiles can
use the same or different VLAN IDs. This allows you to split
wireless stations into groups using similar VLAN IDs.
Second Rx VLAN ID Enter a number from 1 to 4094, but different from the
VLAN ID. Traffic received from the LAN that is tagged with
this VLAN ID is sent to all SSIDs with this VLAN ID
configured in the VLAN ID or Second Rx VLAN ID fields.
See Section 20.3.4 on page 263 for more information.
Apply Click this to save your changes to the NWA.
Reset Click this to return this screen to its last-saved settings.
Table 77 VLAN > Wireless VLAN
FIELD DESCRIPTION