Filter
Top Products
Chapter 10 Wireless Security Screen
NWA-3500/NWA-3550 User’s Guide
163
10.2.4 Security: WPA
Use this screen to set the selected profile to Wi-Fi Protected Access (WPA) security
mode. Select WPA in the Security Mode field to display the following screen.
Figure 92 Security: WPA
The following table describes the labels in this screen.
ReAuthentication
Timer
Specify how often wireless stations have to resend user names and
passwords in order to stay connected.
The default value is 0, which means the reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
Idle Timeout The NWA automatically disconnects a wireless station from the
wired network after a period of inactivity. The wireless station
needs to enter the user name and password again before access to
the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 41 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
LABEL DESCRIPTION
Table 42 Security: WPA
LABEL DESCRIPTION
Profile Name Type a name to identify this security profile.
Security Mode Choose WPA in this field.