Filter
Top Products
Chapter 16 Remote Management Screens
NWA-3500/NWA-3550 User’s Guide
201
To change your NWA’s WWW settings, click REMOTE MGNT > WWW. The
following screen shows.
Figure 115 Remote Management: WWW
The following table describes the labels in this screen.
Table 56 Remote Management: WWW
LABEL DESCRIPTION
WWW
Server Port This is set to port 80 by default.
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Server Access Select the interface(s) through which a computer may access the NWA
using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA using this service.
HTTPS
Server
Certificate
Select the Server Certificate that the NWA will use to identify itself.
The NWA is the SSL server and must always authenticate itself to the
SSL client (the computer which requests the HTTPS connection with the
NWA).
Authenticate
Client
Certificates
Select Authenticate Client Certificates (optional) to require the SSL
client to authenticate itself with the NWA by sending the NWA a
certificate. To do that the SSL client must have a CA-signed certificate
from a CA that has been imported as a trusted CA on the NWA (see the
appendix on importing certificates for details).