Filter
Top Products
Prestige 128IMH ISDN Modem/ Router/Hub
Dial-In Server Configuration 8-7
field specifies the first one in the pool.
IP Count (1,2)
In this field, enter the number (1 or 2,) of addresses in
the IP Pool. For example, if the starting address is
192.168.135.5 and the count is 2, then the pool will have
192.68.135.5 and 192.68.135.6
1, 2
IPX Net. Num. Supplied By:
IPX Pool This field tells your Prestige to provide the remote host
with an IPX network number from the pool. Otherwise,
your Prestige will generate a random IPX network
number.
Yes/No
(Default = No)
IPX Start Net Num
This field is applicable only if you selected Yes in the
Dial-In IPX Net. Num. Supplied By: IPX Pool field. The
IPX pool contains contiguous IPX network numbers and
this field specifies the first one in the pool.
IPX Count (2,16) Enter the number (2 - 16) of network numbers in the IPX
Pool. For example, if the starting number is 12345678,
and the count is 2, then the IPX pool will have 12345678
and 12345679.
2 to 16
Session Options:
Edit Filter Sets
Press Yes, then [Enter] to edit the filter sets. Keep in
mind that the filter set(s) will only apply to remote dial-in
users but not the remote nodes.
Note that spaces and [-] symbol, are accepted in this
field. For more information on customizing your filter
sets, see Chapter 9 - Filter Configuration. The default is
blank, i.e., no filters.
Default = blank
Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the message [Press
ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.