Filter
Top Products
Chapter 4 Wireless LAN
FSG1100HN User’s Guide
32
4.4 Wireless Basic Settings Screen
The Wireless Basic Settings window allows users to configure the Wireless LAN
Interface.
Click Wireless > Basic Settings to open the Wireless Basic Settings screen.
Wireless > Basic Settings
The following table describes the basic wireless labels in this screen.
Wireless > Basic Settings
LABEL
DESCRIPTION
Wireless Basic Settings
Wireless
LAN
Interface
Enable or disable the wireless LAN interface on the FSG1100HN.
Band
Choose the proper operating frequency for the wireless network. The
options are: 2.4 GHz (B+G+N) for networks using a mix of 802.11b,
802.11g, and 802.11n wireless clients, 2.4 GHz (G+N) for networks
using a mix of 802.11g and 802.11n wireless clients, 2.4 GHz (B+G)
for networks using a mix of 802.11b and 802.11g wireless clients, 2.4
GHz (N) for networks using 802.11n wireless clients only, 2.4 GHz (G)
for networks using 802.11g wireless clients only, or 2.4 GHz (B) for
networks using 802.11b wireless clients only.
Mode
Choose the desired mode. The option is AP. Click the Multiple AP
button to open the Multiple AP table, as shown on the next page. Up
to four APs can be enabled and configured on this table.
SSID
Enter a descriptive name for the Service Set Identity (SSID)
associated with the wireless station. All wireless stations associating
with the access point built-in to the FSG1100HN must have the same
SSID.
Channel
Width
Select the channel width. Select 20MHz if no 802.11n wireless clients
are being used. A standard 20 MHz channel offers transfer speeds up
to 150Mbps whereas a 40 MHz channel uses two standard channels
and offers speeds up to 300Mbps. As not all wireless devices support
40 MHz channels, most users select Auto 20/40MHz to allow the