Filter
Top Products
Chapter 6 LAN
FSG1100HN User’s Guide
59
Enable this setting and click Set Static DHCP. Select an Index
between 1 and 20, enter an IP Address, a MAC Address, and
an optional identifying Comment in the Static DHCP window
displayed on the next page.
Domain Name
Enter the domain name. If this is left blank, the ISP may assign
a domain name via DHCP.
IP Alias
IP Alias
Choose Enable to configure the LAN network for the
FSG1100HN.
IP Address
Enter the IP address of the FSG1100HN in dotted decimal
notation.
Subnet Mask
The FSG1100HN will automatically calculate the subnet mask
based on the IP address assigned by the user.
Apply
Click Apply to save your changes back to the FSG1100HN.
Refresh
Click Refresh to begin configuring this screen afresh.
6.4.1 Active DHCP Client Table
The Active DHCP Client Table provides users a view of the current DHCP clients,
including IP address, MAC address, and the amount of time before the entry
expires.
Click Networking > LAN > Show Client to open the Active DHCP Client Table
screen.
Networking > LAN > Show Client
The following table describes the active DHCP client labels in this screen.
Networking > LAN > Show Client
LABEL
DESCRIPTION
Index
The index number of the static table entry.
IP Address
The LAN IP address of a computer on the LAN.
MAC Address
The MAC address of a computer on the LAN.
Time Left (sec)
The amount of time, in seconds, before the static table entry
expires
Refresh
Click Refresh to begin configuring this screen afresh.
Close
Click Close to close this pop-up window.