Filter
Top Products
Chapter 5 WAN
FSG1100HN User’s Guide
54
Attain DNS
Automatically
Click to attain DNS automatically. Otherwise, enter DNS
manually using the field below.
Set DNS Manually
Enter the DNS server IP address(es) assigned by the ISP.
DNS1-DNS3
Enter the DNS server IP address(es) assigned by the ISP.
Clone MAC
Address
Enable MAC address cloning.
Enable UPnP
Enable the Universal Plug and Play (UPnP) feature. Universal
Plug and Play (UPnP) is a distributed, open networking
standard that uses TCP/IP for simple peer-to-peer network
connectivity between devices. A UPnP device can dynamically
join a network, obtain an IP address, convey its capabilities
and learn about other devices on the network. In turn, a device
can leave a network smoothly and automatically when it is no
longer in use.
Enable IGMP
Proxy
Enable the IGMP proxy feature. IGMP proxy enables the
device to issue IGMP host messages on behalf of hosts that
the device discovered through standard IGMP interfaces.
Enable Ping
Access on WAN
Enable the Ping access on WAN feature. This allows Ping to
use the WAN to send ICMP echo request packets to the target
host and listen for ICMP echo response replies.
Enable Web Server
Access on WAN
Enable the Web server access on WAN feature. This allows
Web server access via the WAN.
Enable Multicast
Shortcut
Enable the Multicast shortcut feature. IGMP (Internet Group
Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group - it is not used to
carry user data. The FSG1100HN supports both IGMP version
1 and IGMP version 2. At start up, the FSG1100HN queries all
directly connected networks to gather group
membership. After that, it periodically updates this information.
Enable IPSec Pass
Through on VPN
Connection
Enable the IPSec Pass Through on VPN connection feature.
This encapsulates a complete IP datagram, forming a virtual
tunnel between IPSec-capable devices.
Enable PPTP Pass
Through on VPN
Connection
Enable the PPTP Pass Through on VPN connection feature.
Point-to-Point Tunneling Protocol (PPTP) enables secure
transfer of data through a Virtual Private Network (VPN).
Enable L2TP Pass
Through on VPN
Connection
Enable the L2TP Pass Through on VPN connection feature.
Layer 2 Tunneling Protocol (L2TP) is used to support data
transfer through a Virtual Private Network (VPN). It relies on an
encryption protocol that it passes within the tunnel to provide
privacy.
Apply
Click Apply to save your changes back to the FSG1100HN.
Refresh
Click Refresh to begin configuring this screen afresh.