Filter
Top Products
Chapter 11 Auto Provision
FSG1100HN User’s Guide
88
11
Auto Provision
11.1 Auto Provision Screen
The Auto Provision screen allows automatic updating of configurable settings for
configuration files and image files via TFTP, FTP server, or HTTP server.
Click Management > Auto Provision to open the Auto Provision screen.
Management > Auto Provision
The following table describes the auto provision labels in this screen.
Management > Auto Provision
LABEL
DESCRIPTION
Auto Provision
Active
Enable or Disable the automatic provision feature.
Protocol
Select the provision method: TFTP, FTP, or HTTP.
IP
Address
Enter the IP address to be used in auto provisioning.
Port
Enter the port to be used in auto provisioning.
Retry
Time
Select the number of retry attempts allowed. The range is from 0 to 5
attempts.
Timeout
Enter an age-out value, in seconds, between 30 and 604800.
Delay
Time
Enter a delay time, in seconds, between 30 and 604800.
Apply
Click Apply to save your changes back to the FSG1100HN.