Filter
Top Products
Chapter 5 Tutorials
WRE2205 User’s Guide
31
Figure 18 Example Connection to AP using WPS: PBC Method
5.3.2 Connecting to an AP with the WPS PIN Method
When you use the PIN configuration method, you need to use both the configuration interface of
the AP and the WRE2205’s configuration interface.
1 Log into WRE2205’s Web Configurator and navigate to the Network > Wireless LAN > WPS
Station screen. Select Enrollee in Config Mode to get a PIN number.
2 Enter the PIN number in the WPS PIN field of the AP’s configuration interface.
3 Click the Start PIN button on the WRE2205 and the Start button (or the button next to the PIN
field) on the AP’s configuration interface within about one minute, then wait two minutes for the
WPS configuration to complete.
The AP authenticates the WRE2205 and sends the proper configuration settings to the WRE2205.
This may take up to two minutes. Then the WRE2205 is able to communicate with the AP securely.
The following figure shows an example of how to set up wireless network and security on the AP
and WRE2205 by using PIN method.
WRE2205
SECURITY INFO
COMMUNICATION
WITHIN 1 MINUTE
AP