Filter
Top Products
Chapter 5 Tutorials
WRE2205 User’s Guide
34
5 Click APPLY to save settings and restart the WRE2205. Click CONTINUE to go to the Status
screen without saving the settings and restarting the WRE2205.
Figure 24 Tutorial: Saving settings
5.3.4 Selecting an AP by Manually Entering Security Information
This example shows you how to configure wireless security settings with the following parameters
on your WRE2205.
Follow the steps below to create a secure wireless network by manually entering the AP’s wireless
security settings in the WRE2205’s interface.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.2 on page 13).
1 Select Setup repeater manually.
2 Type the SSID of the AP into the SSID field and click Next.
Figure 25 Tutorial: Typing an SSID
SSID ExampleSSID
Channel 7
Security WPA2 PSK