Setting Custom Paper Sizes
3-10 Printer Tasks
Setting Custom Paper Sizes
The custom paper tray can accommodate a wide range of paper sizes, using continuously
adjustable paper guides.
The custom paper tray can accommodate paper stock as small as 4.75 x 7.2 inches (120 x 182
mm) or as large as 11.7 x 17 inches (297 x 431.8 mm). You can install one or more custom
trays in the printer, but they must all be set to the same size.
There are two tasks in setting up custom paper sizes in the custom tray:
• Define the custom tray.
• Set the paper size in the printer menu settings. (Save the dimensions and menu numbers in
case you must refill the tray at some other time.)
1. To specify a tray as the custom tray, press PapSize on the Main Screen (Figure 3-13) to
display the screen shown in Figure 3-14. This display identifies the paper size in each
tray.
Figure 3-13 Main Screen
2. Press
į
or Ĭ to highlight the tray to define as a CUSTOM tray.
Figure 3-14 Paper tray selections
Ready - - free
JUN 18 05:32.23
PCL
Offline
Offline
Custom Menu Test PapSize
600dpi
LTR
LTR
LTR
Online
Message field
Printer is offline
Online
PapSize
Online
tray1size =LETTER
tray2size =LETTER
tray3size =LETTER
