Clean signal with 100% tracking.
Scratch Live is set
to receive phono level input. Set to the correct value in
the setup menu.
Very susceptible to interference.
Attach the turntable’s ground wire.
Scratch Live is not receiving any control
signal - check your connections.
Scratch Live is set to
receive line level input. Set to the correct value in the
setup menu.
Picking up huge
amounts of noise, barely tracking. Connect your
turntables directly to the hardware.
Bass is reaching the
stylus. Try to isolate the turntable from the speakers.
Dust is preventing the stylus from
tracking the groove correctly. Clean your needle and the
control vinyl.
Try re-seating, cleaning or
replacing your stylus.
Most of the problems that occur with Scratch Live can be attributed to it not getting a good reading of the control signal from your records or CDs. These examples show what the scopes on the
setup screen can look like to help solve possible problems. Some problems cause similar looking scopes, e.g., if your scopes look like the Dusty Needle one, the cause could be a damaged needle.
RANE SL 3 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 1.9
32
