GL-1010 Administrator’s Guide 147
will be incorrect and if stapling is enabled, each section will
be stapled individually.
Prerequisites
n You can enable Macintosh printing remotely, by using
TopAccess on the administrator’s workstation, or locally,
using the copier’s LCD Touch Screen.
Macintosh LPD Setup
1 Launch your Web browser and enter the IP address of the
GL-1010 you want to configure to access the embedded Web
site, TopAccess. (Refer to
Opening TopAccess on page 64.)
If you do not know the IP address, you can find it by using
GL DocMon (see the GL-1010 Operator’s Guide (Basic) for
details).
2 Click the Login link and enter the administrative username
and password.
3 Click the Administration tab.
4 Click the Setup submenu.
5 Click the Print Services link.
