244 GL-1010 Administrator’s Guide
4 Depending on the operating system, select the following tab:,
5 Make sure that the path to the printer and the device name are
correct. \\
<device name \<driver>
Where <device name> is the same as the device name set
from the copier LCD Touch Screen (refer to
Naming the
Device and Workgroup
on page 27 for details). For the <driver>
portion, it should be one of the following Toshiba GL-1010
drivers:
M GL_PCL6
M GL_PS
6 Click the General Tab and then click Print Test Page to confirm
that the settings are correct.
Command Line Options Not Processed by GL-1010.
Problem Description
All print options are sent to the GL-1010 at the start of the print
job. If the print file already contains print commands, it will
override the command line options you set. For example, if the
print file specifies the Letter media, and you specify the A4
media option with the
lp command, the document is output on
letter size paper (provided, of course, that all copier-related
restrictions have been met).
Corrective Action
Change the properties in the document you want to print and then
recreate the print file. Submit the print job using the LP command
without setting additional parameters.
In Windows 95/98/2000/Me: In Windows NT:
Select Details. Browse to
select the printer or Novell
queue.
Select Ports. Add a new port
and map it to the printer.
Refer to GL-1010
Operator’s Guide (Basic)
for instructions.
