GL-1010 Administrator’s Guide 203
Unix Environment
M TCP/IP Protocol
M Microsoft Peer-to-Peer
networking
M Clients running on HP,
Sun, and AIX platforms
1 Is TCP/IP set up on the GL-
1010 device?
Next
Step
↓
→ Configuring TCP/
IP Protocol Settings
on page 19.
2 Did you successfully install the
Toshiba Unix filters?
Next
Step
↓
→ TAR File Setup on
page 140.
3 Did you successfully create
and set up the GL-1010 print
queue?
Next
Step
↓
→ Unix Queue Setup
on page 141.
4 Can you print to the GL-1010
using LPD as root?
Next
Step
↓
→ Set up Unix
access for
GL-1010
to enable
other users to print
from the Bourne
shell. Refer to your
Unix documentation
for more
information.
5 Can you ping the GL-1010
from your workstation?
Next
Step
↓
→ Try remote ping
from another
server. If you can
reach the
GL-1010
from that
server, the check for
conflicts between
the
GL-1010 and your
current network
segment.
6 Is the LP Daemon
functioning?
Next
Step
↓
→ Reload Daemon
or restart the
system.
7 Again, check the GL-1010’s IP
address and re-create print
services. Check for problems
or conflicts in the /etc/hosts
file.
End → Contact your
Toshiba
authorized dealer
for support.
Resolving Network Connectivity and Printing Issues (Continued)
Network
Configuration Check... Yes No
For
Instructions,
Go To...
NOTE:
Cross platform issues are
beyond the scope of this
guide. Please refer to your
LAN support managers for
more detailed information.
