Filter
Top Products
The LCD Console 4-5
The LCD Console
The SuperStack II Switch 2000 TR has an LCD console
located on the front panel. Use this console for read-
ing and setting the Switch and module parameters.
Refer to the “SuperStack II Switch 2000 TR User
Guide” for a menu map and for specific information
and uses of the console.
The console provides a quick method for viewing the
type of module in the Switch as well as the hardware
and software versions of the module. See Figure 4-2.
The menus of the LCD module are circular. Press
[Enter] until the menu you wish to view appears. For
more information refer to Chapter 5 of the Switch
2000 TR User Guide that accompanies your switch.
To view the module status, proceed as follows from
the top LCD menu which displays the
Switch 2000 TR banner:
Figure 4-2 I/O Module LCD Menus
1 Press [Enter] to view the next level.
2 Press [Down Arrow] until
Switch 2000 TR > I/O Module appears.
3 Press [Enter]. I/O Module > Module Type appears.
4 Press [Enter]. STATUS > Module Type appears.
5 Press [Down Arrow] to scroll down through the I/O
Module menus.
6 Press [Enter] at any one of the following fields to view
the information described below. Press [Down Arrow]
to move through the circular menus.
■ Module Type—module type
■ Module State—current state of module (UP,
DOWN)
■ HW Version—current version of hardware
ENTER
> I/O Module
Switch 2000 TR
ENTER
Module Type
Module State
HW Version