Filter
Top Products
4-38
C
H
A
P
T
E
R
4:
M
A
N
A
G
I
N
G
Y
O
U
R
H
U
B
U
S
I
N
G
Q
U
I
C
K
C
O
N
F
I
G
M
A
N
A
G
E
R
2
In the General Info dialog box, choose the
WorkGroup
category
.
3
In the WorkGroup Monitor panel, click on
Add
.
Quick Config Manager displays the Add Remote Poll
dialog box, as shown in
Figure 4-17
.
4
In the Add/Edit Remote Poll dialog box, enter the IP
or IPX address of the device that you want the hub
to poll.
5
Choose the rate at which the device is to be polled.
If the device is critical to the performance of your
network, select a frequent rate. If the device is not
important or on a remote network you can select a
less frequent rate.
6
Select whether polling of this device is to be enabled
or disabled.
You can have up to 10 polling session entries for the
hub
(poll 10 different devices)
, all of which can be
enabled. If you do not want to poll a device now but
want to keep its information for future use, you can
simply disable it by selecting Disable.
7
Click on
OK
.
Figure 4-17
Add Remote Poll Dialog Box
16710.bk : MANAGING.FRM Page 38 Tuesday, October 7, 1997 11:38 AM