Filter
Top Products
Additional Management
4-39
When you have added a device to the WorkGroup
Monitor table, its entry is color-coded:
■
Green
— Device being polled and
communicating.
■
Red
— Device being polled but is not
communicating.
■
Blue
— Device not being polled by the hub.
In the WorkGroup Monitor panel:
Address
Shows the addresses of the polled devices.
Rate
Shows the frequency at which the device is
polled.
Round Trip
Shows the time taken for the device to
respond to the last poll.
Information
Shows the number of routers through
which the hub communicates with the device or any
information gathered during the poll.
You can edit or delete a Remote Poll by selecting it
from the
panel
and clicking on the appropriate
button.
Additional Management
If you want to perform any of the following
additional management, use the VT100 screens, refer
to
Chapter 5
:
■
View the MAC address
■
Specify IPX information
■
Con
n
e
ct a modem to
the
console
port
■
Create new users, with different community strings,
and disable different access methods
■
Poll a remote device to see if it is working
■
View the versions of the hub’s internal software and
hardware
■
Download new software to the hub
16710.bk : MANAGING.FRM Page 39 Tuesday, October 7, 1997 11:38 AM